DJI's flagship stabilizer expansion platform DJI RS 4 Pro works with the DJI Focus Pro lens control system, DJI Transmission image transmission system and a rich control ecosystem to bring the film and television industry a full-link solution for film and television production that integrates stabilization, transmission, monitoring, focus tracking and control, further broadening the boundaries of creation and allowing creators to fully exert their superb skills.

◆ Features

Powerful Load
The DJI RS 4 Pro arm is made of carbon fiber material and has a load capacity of 4.5 kg. It is powerful enough to carry mainstream micro-single/cine cameras and lens combinations.

Second-generation native horizontal and vertical shooting switching
‌With the new gimbal horizontal plate design, the RS 4 Pro can achieve a simpler second-generation native horizontal and vertical shooting switching. Photographers do not need to purchase additional accessories. Just remove the horizontal plate and fasten it vertically to complete the vertical shooting switch. The operation is done in one go.

Smooth leveling
The roll axis has added double rolling bearings for easier adjustment.
All three axes are made of TeflonTM material with a lower friction coefficient, which can be smoothly leveled even with heavier models.
The pitch axis is equipped with front and rear fine-tuning knobs, which can achieve millimeter-level fine adjustment when changing cameras or lenses.
The upper quick-release plate has a new adjustable retaining edge design to prevent the camera from loosening.

Automatic screen lock
The OLED touch screen has a new automatic screen lock function to avoid accidental touches when shooting. In the lock screen state, the screen can also display the current gimbal and joystick mode at low brightness to reduce power consumption.

Second-generation automatic axis lock
DJI RS 4 Pro is equipped with a new generation of automatic axis lock, which can not only quickly enter the working and sleeping states, greatly improving the speed of shooting, transition and storage, but also thanks to the axis lock design with smaller virtual position, the shaking of the gimbal in the locked state is further reduced.

High level of stability
DJI RS 4 Pro's three-axis motor torque has increased by 20%, and has more power redundancy after leveling. Even if it is equipped with a heavier model or installed with more accessories, the gimbal still responds sensitively and accurately, and also provides more sufficient power support for gimbal stabilization in various shooting scenes.

Car stabilization mode
The new car stabilization mode optimizes the gimbal stabilization algorithm based on the vehicle vibration and wind resistance data during car shooting, which can stably present wonderful moments during shaking.

DJI RS 4th Generation Stabilization Algorithm
The new generation of RS stabilization algorithm is fully optimized based on different usage scenarios, which can better balance the stabilization strength and the actual camera feel, and has excellent anti-shake performance and user experience. In addition, the vertical anti-shake performance is greatly enhanced, which can easily handle vertical shooting scenes such as running and low angles.

◆ FAQ

How to maintain a drone?
Maintaining a drone requires regular inspection and care. First, make sure the battery stays charged and avoid overcharging or discharging. Clean the fuselage, propellers, and camera regularly to remove dust and debris. Check the propellers for cracks or damage and replace them in time. Calibrate the gyroscope and GPS before flight to ensure stability. After flight, check the battery, motor, and control system to confirm that there are no abnormalities. Update the firmware regularly to ensure the latest performance of the device. In addition, avoid flying in adverse weather conditions to extend the life of the drone.

What is the safe operation guide for Drone?
First, make sure you are familiar with local laws and regulations before flying, and avoid flying in no-fly zones. Maintain line of sight during flight to avoid loss of control or signal. Check the status of components such as batteries, motors, propellers, etc. to ensure that the equipment is in good condition. Avoid strong winds, heavy rain or thunderstorms during flight to ensure stable flight. Comply with flight altitude restrictions to avoid collisions with buildings or people. Calibrate GPS and gyroscopes regularly to ensure accurate navigation. Finally, shut down the drone in time and store it properly after the flight.

How to extend the life of drone batteries?
The key to extending the life of drone batteries is to avoid overcharging and over-discharging. Before each charge, make sure the battery is between 20%-80% and do not wait until the battery is completely exhausted. Use the original charger and avoid using non-compliant charging equipment. Avoid flying in extreme temperatures, especially in overheated or cold environments, as high temperatures will accelerate battery aging. Use the battery regularly and avoid leaving it for too long when not in use. Charge it promptly after the flight to avoid the battery being in a low power state for a long time.

◆ Industry Applications

◆ Company Profile

Jiangsu Legend Intelligent Technology Co., Ltd. is a professional UAV industry application solution service provider. Relying on a complete service system and a good cooperation mechanism, it has become a deep partner of DJI industry applications.
Based on DJI industry application series products and relying on the East China UAV base, we build an ecosystem and six centers to provide customers with multi-dimensional and all-round solutions from top-level design to landing services. Help the fields of public security fire protection, power inspection, surveying and mapping infrastructure, urban management, etc., liberate productivity, reshape productivity, and build a link between technology and services.
Since its establishment, Jiangsu Legend Intelligent Technology Co., Ltd. has obtained various qualification certificates in the industry, and has become an industry leader through continuous in-depth exploration and exploration of the UAV field. It has established long-term strategic cooperation relationships with government and enterprise units such as Nantong Rudong Environmental Protection Bureau, Nantong Rugao Environmental Protection Bureau, Yancheng Funing State Grid, and Shandong Linyi Urban Management Center. It has continued to grow in solving practical problems, and gradually formed a win-win concept with cutting-edge technology as a technical means and personalized customization as a service purpose, to help the healthy and sustainable development of society. In the future, the company will continue to invest in research and development to increase its comprehensive competitiveness and actively deploy high-tech enterprises.